Standing Seam metal roofing is one of the oldest and most practical roofing solutions. Its classical look enhances the roofline of virtually any architectural style. Once installed, its dramatic shadow lines run continuously from ridge to eave, accenting the pitch and plane of every roof angle. Our Standing Seam panels can be ordered in a variety of styles, with more than two dozen Cool Roof color choices or elegant bare metals. Standing Seam panels can be roll-formed on the jobsite to eliminate damage and waste.
Often a home or commercial project can be enhanced by the natural look of bare metal rather than a coated color. We offer all of our product profiles in copper, Rheinzink® and bare Zincalume® for a traditional metal look. In true copper, these products develop a natural patina over time. There are no reflective or emissive properties to these products.
Mechanical Standing Seam panels feature a seam that's mechanically locked into place, providing the highest degree of strength. They are available in a range of panel widths with varying seam heights.
Snap Lock Standing Seam panels overlap at the seam, snap and lock into place.
Snap-on batten seams lock these Standing Seam panels securely into place.
Our aluminum shakes and shingles offer the rustic look of split, weathered wood. But unlike wood, they feature our Cool Roof reflective paint and can withstand winds of up to 120 mph. Lightweight, fire-resistant and made from 98% post-consumer recycled metals, our Country Manor Shakes and Rustic Shingles are locked together on all four sides to create a weather-tight seal.
For designs enhanced by a corrugated look, Custom-Bilt Metals offers corrugated roof and wall panels in two profiles. Available as a standard corrugated with a 7/8"-inch corrugation or 7.2" rib panels, both are factory fabricated and can be ordered in a variety of metal types and finishes including Bare Zincalume®, natural copper and weathering steel.
All Custom-Bilt Metals corrugated roof and wall panels use full 70% PVDF (Polyvinylidene fluoride) or Kynar 500® or Hylar® 5000 or Fluropon® reflective pigments that reflect more heat than virtually any other coating and will not fade. Our metal and wall panels meet LEED criteria with 25% recycled steel and are 100% recyclable.
We can help with the design and detail of our project beyond the roof. Choose wall and soffit panels in matching or accent colors to create dramatic effects in similar profile patterns. These panels offer a flush-panel interlocking seam.
Panel Depth: 1"
Standard Panel Width: 12"
Available with Stiffening Ribs
Stucco embossed, Smooth, Vented